AC Thruster ø250mm 400V

AC Thruster ø250mm 400V
240kg. Vertical install

 

Side-Power PROproportional Speed

PROproportional Speed

A PROportional speed controlled thruster system allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently. By limiting the power under normal weather conditions, noise levels are significantly reduced. The system also includes a practical HOLD-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making single handed docking very easy indeed! Proportional thrusters are also the best choice for joystick interaction.


Side-Power S-link™

S-link™

S-link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.

  • Round, compact and waterproof plugs with unique keying and color coding to avoid faulty hookup
  • Unlimited number of commands or information transfer on a single cable
  • User feedback at panel
  • Intelligent troubleshooting

Side-Power Q-prop™

Q-prop™

The 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power propellers. And the result is even increased thrust on several models.

  • Noise reductions of up to 75% measured in controlled environments
  • The expected and tested normal noise reduction in "average installations" 20-40%

Side-Power Twin Propellers

Twin Counter-Rotating Propellers

Two counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boat builders for their high-end yachts.


Side-Power Sealed Drive

Sealed and lifetime lubricated gearleg

Sealed gear leg using ceramic/carbon mechanical seals.

  • Prefilled with longlife gear oil for lifetime lubrication on smaller models
SAC240/250-C
Thrust, continuous (kg • lbs) 240 • 529
Thrust, max. (kg • lbs) -
Motor output (kW • hp) 14 • 19
Typical boat size (m • ft) 17 - 25 • 42 - 75
Tunnel - Inside diameter (mm • in) 250 • 9.8
Item Code SAC240/250-C-X-X

Measurements - AC Electric Thrusters

SAC Horizontally mounted version - Angle 1SAC Horizontally mounted version - Angle 2
SAC Vertically mounted version
A mm B mm C mm D mm E mm F mm G mm H mm J mm 1 Weight kg
SAC240/250 (horizontal version) 820 250 264 357 100 262 132 347 482 68
SAC240/250 (vertical version) 820 250 264 357 100 262 132 347 393 68
SAC320/300 (horizontal version) 863 300 320 357 120 262 132 347 524 71
SAC320/300 (vertical version) 863 300 320 357 120 262 132 347 524 71
SAC450/386 (horizontal version) 1204 386 410 503 122 356 180 439 736 189
SAC450/386 (vertical version) 1204 386 410 503 122 356 180 439 615 189
SAC520/386 (horizontal version) 1204 386 410 503 122 356 180 439 736 189
SAC520/386 (vertical version) 1204 386 410 503 122 356 180 439 615 189
SAC700/412 (horizontal version) 1237 412 444 488 155 356 180 439 770 205
SAC700/412 (vertical version) 1237 412 444 488 155 356 180 439 651 205
SAC750/513 (horizontal version) 1352 513 545 681 170 396 200 496 849 330
SAC750/513 (vertical version) 1352 513 545 681 170 396 200 496 728 330
SAC900/513 (horizontal version) 1466 513 545 681 170 449 225 563 TBA 450
SAC900/513 (vertical version) 1466 513 545 681 170 449 225 563 TBA 450
SAC1100/513-I (horizontal version) 1466 513 545 681 170 449 225 563 TBA 450
SAC1100/513-I (vertical version) 1466 513 545 681 170 449 225 563 TBA 450
SAC1100/513-C (horizontal version) 1564 513 545 681 200 497 250 660 915 575
SAC1100/513-C (vertical version) 1564 513 545 681 200 497 250 660 759 575
SAC1300/610 (horizontal version) 1628 610 646 685 200 555 280 713 998 680
SAC1300/610 (vertical version) 1628 610 646 685 200 555 280 713 808 680
SAC1400/610 (horizontal version) 1628 610 646 685 200 555 280 713 998 740
SAC1400/610 (vertical version) 1628 610 646 685 200 555 280 713 808 740
1 Weight stated is for complete thruster excluding VFD

Measurements - Variable Frequency Drive (VFD)

VFD Measurements - Front ViewVFD Measurements - Side View

Thruster Model VFD Model Weight kg D mm W mm H mm
SAC240 SAC240/250-C-2-x2 ACS580-01-047A-2 11,8 228 203 454
SAC240/250-C-4-x2 ACS580-01-033A-4 11,8 228 203 454
SAC320 SAC320/300-C-2-x2 ACS580-01-076A-2 19 258 203 600
SAC320/300-C-4-x2 ACS580-01-046A-4 11,8 228 203 454
SAC450 SAC450/386-C-2-x2 ACS580-01-115A-2 28,3 295 203 732
SAC450/386-C-4-x2 ACS580-01-062A-4 19 258 203 600
SAC520 SAC520/386-I-2-x2 ACS580-01-144A-2 42,4 369 252 727
SAC520/386-I-4-x2 ACS580-01-073A-4 19 258 203 600
SAC520/386-C-4-x2 ACS580-01-144A-2 42,4 369 252 727
SAC520/386-C-4-x2 ACS580-01-073A-4 19 258 203 600
SAC700 SAC700/412-C-2-x2 ACS580-01-171A-2 54 370 284 880
SAC700/412-C-4-x2 ACS580-01-106A-4 28,3 295 203 732
SAC750 SAC750/513-I-4-x2 ACS580-01-088A-4 28,3 295 203 372
SAC900 SAC900/513-I-4-x2 ACS580-01-106A-4 28,3 295 203 732
SAC1100 SAC1100/513-I-4-x2 ACS580-01-145A-4 42,4 369 252 727
SAC1100/513-C-4-x2 ACS580-01-145A-4 54 370 284 880
SAC1300 SAC1300/610-I-4-x2 ACS580-01-169A-4 54 370 284 880
SAC1400 SAC1400/610-I-4-x2 ACS580-01-169A-4 54 370 284 880
2 -H for horizontal version, -V for vertical version
Fil Type Sprog Download
Manual SAC 250mm 300mm 386mm 412mm 513mm 610mm.pdf Manual English  Download
CAD-filer og tekniske tegniner

3D-modeller og tekniske tegninger
for designere og båtbyggere

Hos Sleipner har vi delt vår kunnskap og teknologi med ingeniører og båtbyggere i over hundre år. Nå kan du også få tilgang til vårt CAD bibliotek med .cad, .igs, .dwg, .stp, .xt, .pdf filer og mer.

Få tilgang til 1000+ CAD-filer