The new SPS55 actuators for the Vector fins™ are incredibly compact and silent, designed to fit in the small available spaces in modern boats below 20m/70ft where living space is strongly prioritized.
The SPS55 actuators have been designed to satisfy the needs of owner operated vessels with a total focus on reliability and hassle-free operation, as well as ensuring a quiet operation as they will mostly be installed below the floor in living spaces.
Technical design benefits:
- Squared base plate provides large load distribution area to hull while still being possible to install in tight areas between stringers and bulkheads.
- Dual, balanced cylinders provide symmetrical load and force.
- The actuator can be installed in any direction in the boat, the fin angle is totally independent of actuator direction.
- No moving hoses at all secures against leakages and potential wear, as well as making the installation easier.
- Oversized bearings for lifetime operation with only a minimal level of maintenance.
- Rack & pinion drive connection for quiet, reliable, long life operation, with very easy service when needed after thousands of operational hours.
- Fins are installed and removed very easy and quickly from the outside for best convenience in for example transport or other haul-out situations where this might be needed.
- Defined shaft-shear point in case of the fins accidentally hitting something.
- All wet parts in stainless steel.
Size compared to other brand actuators for similar fin sizes:
|A (mm • in)
||201 • 7.91"
|B (mm • in)
||152 • 5.98"
|C (mm • in)
||49 • 1.93"
|D (mm • in)
||550 • 21.7"
|E (mm • in)
||439 • 17.3"
|F (mm • in)
||510 • 20.1"
|Shaft Ø (mm • in)
||64 • 2.52"
|Weight* (kg • lbs)
||100 • 220
|For Vector fin
||VF650 / VF800
*Complete actuator assembly, per side
Manual Stabilizer Operation and User Guide V2.pdf
3D-modeller og tekniske tegninger
for designere og båtbyggere
Hos Sleipner har vi delt vår kunnskap og teknologi med ingeniører og båtbyggere i over hundre år. Nå kan du også få tilgang til vårt CAD bibliotek med .cad, .igs, .dwg, .stp, .xt, .pdf filer og mer.
Få tilgang til 1000+ CAD-filer