SH360

 

Velg variant
Light duty thrust up to (kg • lbs) 360 • 759
Heavy duty thrust up to (kg • lbs) 270 • 567
Typical boat size (ft • m) 59' - 108' • 18 - 33
Tunnel I.D. (mm • in) 300 • 11.8"
Propulsion system Twin Counter-Rotating
Hydraulic power up to (kW • hp) 27 • 37
Weight (kg • lbs) 26 • 57.3
Item Code SH360/300TC-xxx

Weight stated include thruster, props and bellhousing ONLY.

Weight of hydraulic motor (typical 25 - 40 kg) comes in addition.

Side-Power PROportional

PROportional

A PROportional speed controlled thruster system allows for more precise handling of the boat in all conditions, applying only the necessary power needed to complete your maneuver confidently. By limiting the power under normal weather conditions, noise levels are significantly reduced.

The system also includes a practical HOLD-function in a twin thruster system. With a single press of a button, the bow and stern thruster will keep you alongside the docks - making single handed docking very easy indeed! Proportional thrusters are also the best choice for joystick interaction.


Side-Power S-link™

S-link™

S-link™ is a CAN-based control system with full intelligent communication between all units in the system, much like a computer network.

  • Round, compact and waterproof connectors with unique keying and color coding to avoid faulty hookup
  • Unlimited number of commands or information transferred on a single cable
  • User feedback at panel
  • Intelligent troubleshooting

Side-Power Q-prop™

Q-prop™

The new 5 blade special skew propellers are the result of over 2 years of development work and thousands of tests. They have been designed to reduce the noise level, while maintaining the exceptional efficiency of the old 4 blade Side-Power propellers. This goal was achieved, and we even chose to make them a little bit more aggressive on some models, increasing the thrust on some thrusters about 5%. Please see individual information on each new thruster for more details.

  • Noise reductions of up to 75% measured in controlled environments
  • The expected and tested normal noise reduction in average installations: 20-40%
  • Will be delivered on all Side-Power models except models with 300mm and 385mm tunnel diameter
  • Upgrade kits are available for most SP series thrusters with special adaptors

Side-Power Twin Counter-Rotating

Twin Counter-Rotating Propellers

Two counter-rotating propellers can give the most thrust at a good performance ratio in a minimal tunnel diameter. This system is used in our larger thrusters for maximum power. The TC models are the favourite thrusters among leading boatbuilders for their high-end yachts.


Side-Power Sealed Drive Lifetime Lubricated

Sealed and lifetime lubricated gearleg

Sealed gearleg with long-life "mechanical" seal where highly polished ceramic and carbon surfaces form the only moving sealing surfaces, ensuring protection against damaging water intrusion into the gear leg. Pre-filled with special gear oil for lifetime lubrication.

  • "Mechanical" seals with surfaces of ceramic and carbon for ultimate security against water intrusion
# Description Product
1 Motorbrakett SM-121764
2 AISI 304 61031
3 A4 61043
4 Generic 48571
5 A 61030
6 15x8mm 20bar 2 m Nitril inside NBR outside 61042
7 Adapterplate BA23 SM-141870
8 DIN 912 - M10 x 60 11160
9 DIN 912 - M12 x 50 11250
10 Spring Washer 212128
11 Washer 212125
12 Washer 210125
13 DIN 128 - A10 100036
14 Rexroth motor SM155180
15 Gear Case SM-135546
16 DIN 912 - M10 x 60 11160
17 Spring Washer 210127
18 Washer 210125
19 DIN 912 - M6 x 30 201172
20 SE120/130/150/170/250 109998
21 Washer 201181
22 Hex Nut 101260
23 Q-Prop ‘300 LH SM-136044
24 Q-Prop ‘300 RH SM-141858
25 Propell boss maskinert SM-136043
26 Flex. coupl. CFA8-‘24/SAE-C SM158725

The installer alone has responsibility for the installation of the spare parts. Side-Power only warranty the spare parts supplied only.

The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifications without notice. Therefore, Sleipner Motor AS can not accept liability for any possible differences between product and document.

Fil Type Sprog Download
(INSTALLATION MANUAL) (SH) (360).pdf Manual English  Download
CAD-filer og tekniske tegniner

3D-modeller og tekniske tegninger
for designere og båtbyggere

Hos Sleipner har vi delt vår kunnskap og teknologi med ingeniører og båtbyggere i over hundre år. Nå kan du også få tilgang til vårt CAD bibliotek med .cad, .igs, .dwg, .stp, .xt, .pdf filer og mer.

Få tilgang til 1000+ CAD-filer